Related Manuals for pronovost PUMA-347AG
Summary of Contents for pronovost PUMA-347AG
- Page 1 OPERATOR'S / PARTS MANUAL PUMA-347AGT PUMA-347AG Dump Trailer Model PUMA-347AG & PUMA-347AGT No. C2602 04/2009...
- Page 2 Copyright © Les Machineries Pronovost Inc., 2009 All rights reserved. Printed in Canada.
-
Page 3: Table Of Contents
Basic Start-up Procedures ................. 9 Maintenance ......................10 Storage ........................11 Specifications ......................12 Parts List ........................13 Dump Trailer PUMA-347AG ................13 Dump Trailer PUMA-347AGT ................ 15 Hub 1000 ......................17 Hub 2500 ......................18 Cylinder 30TR12 ....................19 Torque Chart ...................... -
Page 5: Introduction
INTRODUCTION CONGRATULATIONS! Thank you for choosing PRONOVOST. We are NOW take a moment to enter the model, serial confident this equipment will meet your requirements number and the date of purchase of your Trailer in the in terms of quality, performance and reliability. -
Page 6: Safety
SAFETY GENERAL SAFETY SAFETY IN OPERATION WHEN YOU SEE THIS SYMBOL 1) WARNING! Do not overload your trailer, do not exceed the load capacity indicated in the specifications on page 12. 2) Be sure there are no obstructions around the equipment and that no one stands near the equipment when in use. -
Page 7: Safety With Maintenance
SAFETY (cont'd) SAFETY WITH MAINTENANCE SAFETY IN TRANSPORT 1) Perform maintenance according to 1) Be alert while driving on the road. Never carry recommendations contained in this manual. passengers in the trailer. 2) Before performing any work under the raised platform, always install the safety prop provided. -
Page 8: Decals
DECALS SAFETY DECALS MAINTENANCE DECALS The safety decals are affixed wherever special safety The maintenance decals indicate the points requiring precautions are indicated. Locate them on the lubrication. Refer to maintenance section for more equipment and read them carefully. If a decal is details. -
Page 9: Start-Up
START-UP BASIC START-UP PROCEDURES 5) Verify for adequate tightness of all fastening devices. Refer to torque chart on page 20. 1) Lubricate all grease fittings with a good quality 6) Install panels. multi-purpose grease. 7) Do not forget to unlock the proper panel lock 2) Lubricate panel release mechanism with good before dumping. -
Page 10: Maintenance
MAINTENANCE Before performing any work under the raised 6) Lubricate panel release mechanism every 20 hours platform, always install the safety prop provided. of operation. 1) Wipe off all grease fittings with a clean cloth 7) Check tire pressure every 50 hours of operation, before adding grease in order to avoid injecting adjust according to recommendation indicated on dirt or sand. -
Page 11: Storage
STORAGE 1) Store in a cool, dry place. 4) Clean your trailer. 2) Install wooden blocks under the axles to keep the 5) Thoroughly inspect all parts of the trailer. Replace tires off the ground and cover them if left exposed or repair worn or defective parts. -
Page 12: Specifications
SPECIFICATIONS MODEL PUMA-347AG PUMA-347AGT Gross vehicle weight rating 3 000 lbs Box (interior dimensions) 51" x 86" Sides and front panels 12" x 14G (welded) Rear panel 12" x 14G (removable) Rear panel opening From top or bottom Free height 12"... -
Page 13: Parts List
TRAILER PUMA-347AG 170-05023 - 13 -... - Page 14 TRAILER PUMA-347AG (cont'd) REF. PART # DESCRIPTION 110-25841 Swivel hitch ....................Std. Grease fitting 1/4"-28 straight ..............357-54000 Castle nut 1 1/4" NF ................... Std. Cotter pin 3/32" x 2" .................. 120-07052 Frame ....................... 6 PN2310512M Tire Multi Trac 23 x 10.50-12 6 ply ...............
-
Page 15: Dump Trailer Puma-347Agt
TRAILER PUMA-347AGT 170-05281 - 15 -... - Page 16 TRAILER PUMA-347AGT (cont'd) REF. PART # DESCRIPTION 110-25841 Swivel hitch ....................Std. Grease fitting 1/4"-28 straight ..............357-54000 Castle nut 1 1/4" NF ................... Std. Cotter pin 3/32" x 2" .................. 120-07441 Frame ....................... PN18858 Tire 18 x 8.5 x 8-4 ply ................. R874 Rim 8"...
-
Page 17: Hub 1000
HUB H1000 REF. PART # DESCRIPTION Std. Cotter pin 3/16" x 1 1/2" ................53019 Dust cap 1.973 dia..................51529 Castle nut 1" NF noir ................. 53021 Oil seal no. CR523696 ................53022 Roller bearing: cone no. L44643 ..............53023 Roller bearing: cup no. -
Page 18: Hub 2500
HUB H2500 #32218 REAR HUB FOR P-6200 & FRONT AND REAR HUB FOR P-6300 AND P-6302 REF. PART # DESCRIPTION Std. Cotter pin 5/32" x 1 3/4" ................53019 Dust cap D-1000 1.973" ø ................51529 Castle nut 1" NF x 9/16" thick ..............53058 Roller bearing: cone no. -
Page 19: Cylinder 30Tr12
CYLINDER 30TR12 14 ¼" 22¼" REF. PART # DESCRIPTION See RK30TR O-ring....................... See RK30TR Back-up ring ....................See RK30TR O-ring....................... See RK30TR O-ring....................... See RK30TR O-ring....................... See RK30TR Back-up ring ....................See RK30TR Wiper ....................... - - - Yoke (for 3" tube) ..................338-46000 Nut ¾"... -
Page 20: Torque Chart
TORQUE CHART TORQUE SPECIFICATION TABLE Thread UNC and UNF Grade 2 Grade 5 Grade 8* Bolt size Torque Torque Torque Pound feet Newton meters Pound feet Newton meters Pound feet Newton meters Inches min. max. min. max. min. max. min. max. -
Page 21: Warranty
WARRANTY PRONOVOST warrants this product to the initial All PRONOVOST spare parts purchased are covered purchaser for the period of one year from the date of by a three (3) month warranty. purchase against defects in materials and workmanship. This warranty becomes void and nul if the equipment... - Page 24 Ce manuel est aussi disponible en français. Veuillez téléphoner. INNOVATION - EXCELLENCE LES MACHINERIES PRONOVOST INC. 260, route 159, Saint-Tite, Quebec, Canada, G0X 3H0 Tel.: (418) 365-7551, Fax: (418) 365-7954 www.pronovost.qc.ca...