Start-Up; Basic Start-Up Procedures - pronovost P-509 Manual

START-UP

BASIC START-UP PROCEDURES

1) Lubricate all grease fittings with a good quality
multiuse grease.
2) Lubricate panel release mechanism, front and rear
with good quality oil.
3) Adjust tire pressure to manufacturer's
specifications.
4) Install wheels on hubs.
5) Install panels.
6) Install all hydraulic hoses and fittings compatible
with your equipment.
7) Verify for adequate tightness of all fastening
devices. Refer to torque chart on page 20.
8) Operate the hydraulic system a few times, raising
and lowering the platform in order to remove any
trapped air in the system. Then check the oil level
in the tractor's hydraulic oil reservoir.
9) Do not forget to unlock the proper panel before
dumping.
- 9 -
4