Advertisement
Information about the Wi-Fi modem and the Internet connection
From the screen "Information" to go to screen "Wi-Fi" connection you must press the button
"▼". You can do it and by gesture- sliding on the screen to the top of the display.
The fields are as follow:
ID – unique identification number for each modem
IP – Modem's IP address
WiFi mode - – Modem's current state can be any of the following:
• Idle –No connection with WiFi router
• Access point – The modem is waiting for the local WiFi network's SSID and password
• AP Associated – The modem is connected to a router
• Internet Access – Established internet connection
• Connected – The modem is connected to the information system server
Snd/Rcv – – Sent/Received data packages
If the control module is not equipped with a Wi-Fi modem, there will be a message on the screen
"No Wi-Fi device"
Software version of the controller and Wi-Fi module software version.
To reach from "WiFi connection" to "Version" screen you must press the button "▼". You can do
it and with gesture - sliding to the top of the display.
User Manual / ver. 1.2
Electronic pellet burner controller - NPBC-V6T-2
http://www.naturela-bg.com/en/
page 21 of 41
Advertisement
