Electronic pellet burner controller - NPBC-V6T-2
E
XPLOTATION INSTRUCTION
The controller NPBC-V6T-2 is controlled from "Control module" NRC-8. It has 3.5 '' IPS display
with capacitive touch sensor. It has virtual buttons or active places for control as well as by sliding
your finger in a certain direction (gesture).
Micro USB
Controller's main screen appears after turning the power supply on:
Virtuals buttons for
CH Pump
DHW Pump
Time
main screen
Status bar with icons for the
outputs' current state and
Boiler's water
the Internet connection
temperature
Information fields
External stop activated
Left side
(input OD)
Information fields
Fuel type used
Right side
at the moment
Heater On
Main fan's speed
Date,
Burner's work phase (table 1)
or Registered errors (table 2)
User Manual / ver. 1.2
http://www.naturela-bg.com/en/
page 11 of 41