Midea MHC-96HWD1N1(A) Service Manual page 28

R410A Full DC Inverter Split Duct Type Technical Manual
C. New concrete roughcast
Set it with embedded bushes or embedded bolts.
D. Steel beam and girder structure
Set and use supportive angle steel.
2.3 Suspending the indoor unit
Use a hoisting device to hoist the indoor unit, align it with the installation screw, adjust the horizontality
and then tighten it.
2.4 Design and connection of duct

The duct design must comply with the national heating air conditioner pipeline design specifications.

The duct accessories and materials must be produced by professional manufacturers.

In order to prevent air flow shorting, do not keep the air inlet pipe near the air outlet pipe.

Install a filter at an easy-to-maintain place such as intake pipe.(Otherwise, the duct will gather on the
air heat exchanger and lead to fault and water leak of the air conditioner.)

In order to suppress noise effectively, install noise suppression and sound insulation devices,
27
Suspended bolt
Pendant bolt
Unit body
Supportive
angle steel
Pendant bolt
MCAC-UTSM-201503