Chapter 2 System Setup
The following procedures are provided to assist you in installing a pas-
sive backplane, add-on cards, and disk drives into the IPC-644. Please
refer to Appendix A, Exploded Diagram, for details of all the parts of the
IPC-644.
Note
2.1 Removing the Chassis Cover
To remove the cover of IPC-644, please refer to Figure 2.1 and proceed as
follows.
1.
Loosen the seven screws on the top and the right of the chassis.
2.
Remove the chassis cover gently.
IPC-644 User Manual
Use caution when installing or operating the compo-
nents with the chassis open. Be sure to turn off the
power, unplug the power cord and ground yourself by
touching the metal chassis before you handle any
components inside the machine.
Figure 2.1: Removing the chassis cover
8