Replacing The Waste Toner Container - Canon imageRunner Advance 400iF Starter Manual

Hide thumbs Also See for imageRunner Advance 400iF:
Table of Contents

Advertisement

Use only toner cartridges intended for use with
the machine. (See "Consumables, " on p.55.)
Do not touch the opening of the toner cartridge or
subject it to shock by hitting it. Doing so may
cause the toner to leak out of the cartridge.
05
Insert the new toner cartridge in the
toner supply port as far as it will go.
Support the new toner cartridge with your hand from
underneath while pushing it into the machine with
your other hand.
06
Turn the
toner cartridge lock lever
clockwise so that the arrow marks on
the lever and its axis face each other.
*: Toner Cartridge Lock Lever
07
Close the front cover.
1. Close the front cover of the main unit.
2. Lower the control panel back in place.
Replacing the Waste Toner
Container
When the waste toner container nears capacity, a
message appears on the touch panel display. In this
case, you should prepare a new waste toner container.
When the waste toner container is full, a screen with
instructions on how to replace the waste toner
container appears on the touch panel display. You can
follow the procedure described below to replace the
waste toner container.
Even if you do not replace the waste toner container
immediately, you can perform printing for a while. The
number of prints you can make depends on the
content you print.
However, if you continue printing, an error will occur
and you will become unable to print.
*
Replacing the Toner Cartridge/Waste Toner Container
When closing the covers, be careful not to get
your fingers caught, as this may result in
personal injury .
Do not burn or throw used waste toner
containers into open flames . Also, do not store
waste toner containers in places exposed to
open flames, as this may cause the toner to
ignite, resulting in burns or a fire .
If you accidentally spill or scatter toner,
carefully gather the toner particles together or
wipe them up with a soft, damp cloth in a way
that prevents inhalation . Never use a vacuum
cleaner that does not have safeguards against
dust explosions to clean up spilled toner . Doing
so may cause a malfunction in the vacuum
cleaner, or result in a dust explosion due to
static discharge .
If toner is ingested, consult a physician
immediately .
If toner gets onto your hands or clothing, wash
it off immediately with cold water . Washing it
off with warm water will set the toner, and
make it impossible to remove the toner stains .
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner advance 500if

Table of Contents