Canon imageRunner Advance 400iF Starter Manual page 54

17
Place your hand where the hand
symbol ( ) is located on the right
cover of the main unit, and then gently
close the right cover until it clicks into
place.
When closing the cover, be careful not to get your
fingers caught, as this may result in personal injury.
18
Close the front cover.
1. Close the front cover of the main unit.
2. Lower the control panel back in place.
When closing the cover for the waste toner
container, be careful not to get your fingers caught,
as this may result in personal injury.
19
Press [Close].
20
Press [Yes].
Press [Yes] to start initializing the drum unit.
• If you want to initialize the drum unit at a later time,
or if you have not yet replaced the drum, press [No].
• For instructions on initializing the drum unit, see
"Initializing After Replacing Parts. "
Replacing the Toner Cartridge/Waste Toner Container
51