Canon imageRunner Advance 400iF Starter Manual page 32

05
Logging In
In order to perform the following settings, it is
necessary to log in as an administrator.
• Date/time (See step 6 "Setting the Date and
Time. " )
• Network (See step 7 "Network Settings. " )
• Country/region (See step 8 "Setting Country/
Region. " )
• The machine's fax number (See step 9
"Registering Your Machine's Fax Number. " )
• Unit name (See step 10 "Registering the Unit
Name. " )
• Line type (See step 11 "Setting the Line
Type. " )
• System manager information (See step 12
"Specifying the System Manager Settings. " )
Press [Log In] → enter the authentication
information → press [Log In] → [OK].
06
Setting the Date and Time
You can set the current date and time. The
current date and time settings are used as
standard timer settings for functions that
require them.
• Time Zone:
The standard time zones of the world are
expressed globally in terms of the difference in
hours (± up to 12 hours) from GMT (± 0 hours).
A time zone is a region throughout which this
time difference is the same.
• Daylight Saving Time:
In some countries, time is temporarily
advanced throughout the summer season.
This practice is called "Daylight Saving Time. "
Enter the current date and time using
(numeric keys) → press [OK].
Enter the day and the month using four digits
(including zeros). The time is displayed in
24-hour notation.
Examples:
May 6 → 0506
7:05 a.m. → 0705
11:18 p.m. → 2318
If you make a mistake when entering values, press
(Clear) → enter the values again, starting with the
month.
Setting the Time Zone:
●
1. Select the time zone from the <Time Zone>
drop-down list.
Using Daylight Saving Time:
●
1. Press [On] → [Start Date].
2. Select the month and day from the
<Month> and <Day> drop-down lists.
3. Adjust the time using [-] or [+] → press [OK].
4. Press [End Date] → select the month, day,
and time at which Daylight Saving Time
ends → press [OK].
If you set Daylight Saving Time, the machine
automatically sets the standard time of the machine
one hour forward at the specified date and time.
Using the Setup Guide to Configure the Machine
–
29