Canon imageRunner Advance 400iF Starter Manual page 20

05
*1
*1: Drum Unit Lock Lever
06
07
08
drum unit lock lever
Turn the
as it will go.
Remove the cover attached to the drum insertion slot.
The removed cover is not used later on.
Remove the drum unit from its protective bag.
• Do not touch or expose the cylindrical, blue-green part to light
for a long time, as the print quality may deteriorate.
• Do not expose the drum unit to direct sunlight or strong light.
• Condensation (water droplets on the inside or outside) may
form on the drum unit when it is brought into an environment
with a sudden change in temperature or humidity.
• When moving a new drum unit to a location with change in
temperature, leave the drum unit in the protective bag at the
new location for two or more hours to allow it to adjust to the
new temperature.
Pull the two orange rings out and remove the
protective cover.
Attach the Duplex Tray and the Tray Rib
counterclockwise as far
17