Canon imageRunner Advance 400iF Starter Manual page 45

2. Grip the handle, and pull out the paper
drawer until it stops.
3. Remove all of the remaining paper.
02
Adjust the position of the Side Guide.
*2
*1: Lever
*2: Side Guide
1. Squeeze the lever
2. Without releasing the lever, slide the
guide leftward or rightward to align it with
the mark for the desired paper size.
Slide the guides until they click into place. If the left
guide and front guide are not aligned correctly, the
paper size will not correctly appear on the touch
panel display. It is also necessary to adjust the
guides correctly to avoid causing a paper jam, dirty
prints, or making the inside of the machine dirty.
03
Adjust the position of the Front Guide.
*1: Lever
*2: Front Guide
lever
1. Squeeze the
2. Without releasing the lever, slide the
guide backward or forward to align it with
the mark for the desired paper size.
Adjust the guides correctly. Failure to do so may
cause paper jams or dirty prints, or make the inside
of the machine dirty.
42 42
Loading Paper
*1
on the side guide.
side
*1
*2
front guide.
on the
front
04
Load the appropriate size paper into
the paper drawer.
1. Make sure that the paper size setting of the
paper drawer matches the size of the paper
to load in the paper drawer.
2. Load the paper stack against the right wall
of the paper drawer.
3. Gently push the paper drawer back into the
machine until it clicks into place in the
closed position.
When returning the paper drawer to its original
position, be careful not to get your fingers
caught, as this may result in personal injury .
05
Specify the paper type as required.
For more information on registering the paper
size and type, see e-Manual > Settings/
Registration > Preferences > Paper Settings >
Registering the Paper Size and Type for a Paper
Source.
Make sure that the paper type setting of the paper
drawer matches the type of the paper that is being
loaded.
1,2
3