Table of Contents
Advertisement
Balluff Inductive Coupler
Base BIC 1I0-IAA50-M30MI3-SM4A4A and
Remote BIC 2I0-IAA50-M30MI3-SM4A5A
Remote BIC 2I0-IAA50-M30MI3-BPX04-002-M45A
2
Safety
2.1. Proper Use
2.2. Authorized
Personnel
2.3. Obligations of the
Operating
Company
2.4. Malfunctions
2.5. Meaning of the
Warning Notices
2.6. Certification
www.balluff.com
Important!
Before commissioning, carefully read the operating manual.
The device is designed to replace a plug connection in order to ensure contact-free data
transmission.
The system must not be used in applications in which the safety of persons is dependent on
the function of the device.
Warranty and liability claims against the manufacturer are rendered void by:
•
Unauthorized tampering
•
Improper use
Use, installation or handling contrary to the instructions provided in this operating
•
manual
Installation and commissioning may only be performed by trained specialist personnel.
The operating company must ensure that the locally applicable safety regulations are
observed.
The device corresponds to EMC Class A and can cause radio interference. The operating
company must take appropriate precautions to prevent radio interference.
The device may only be used with an approved power supply. (see "Technical Data"). Only
approved cables may be used.
In the event of defects and device malfunctions that cannot be rectified, the device must be
taken out of operation and protected against unauthorized use.
The warning notices in this guide and the measures described for avoiding dangers must be
observed.The warning notices contain the following signal words that indicate the severity of
the danger:
•
Danger:
Indicates an immediate danger that will result in a severe injury or death of persons if not
observed.
Warning:
•
Indicates a potential danger that may result in a severe injury or death of persons if not
observed.
Caution:
•
Indicates a potential danger that may result in light injury to persons or damage to
property if not avoided.
Attention:
•
Indicates a situation that may result in property damage if not avoided.
When working with this product, the following warning notices apply:
Caution!
Risk of burning on hot surfaces!
The active surface heats up even under normal operating conditions.
Keep away hands and objects from the active surface.
Avoid contact of metal objects on the active surface. Fire hazard
With the CE marking, we confirm that our products meet the requirements of EC
directives 2004/108/EC (EMC) and the EMC law.
In our EMC laboratory, which is accredited by DATech for testing electromagnetic
compatibility, evidence has been provided that the Balluff products satisfy the EMC
requirements of the generic standards:
EN 61000-6-4 (Interference emission) and
EN 61000-6-2 (Immunity to interference)
4
Advertisement
Table of Contents
