Automatic Cutout; Battery Status Display - KERN PLJ-GM Series Operating Instruction

8.6.4 Automatic cutout

t1 YES
t1 no
 Selecting the menu item
TARE
 Press
 Repeatedly press
appears
 To change your selection, press
 To change your selection, press
 Setting will be imported by pressing
Change the battery immediately if the battery symbol lights up during battery
operation or charge the accumulator during accumulator operation or the balance will
be turned off shortly.
This symbol will be flashing whilst the battery is being loaded.

8.6.5 Battery status display

This function is used to display the charge status of the battery.
F
 Press
and
 1 second later
 2 seconds later�
The balance returns to weighing mode after the charge status of the battery was
shown. The display symbol
the battery drops below 18%.
30
Balance will be turned off, if weighing does not
take place within 5 minutes.
Balance is not turned off
Operation:
until the following display
TARE
.�
.
PRINT
Operation:
TARE
simultaneously
(bat low) will be activated when the charge status of
Display:
P5 othr
.
Display:
0.00 g
0.00 g
PLJ-GM-BA-e-1614
5.1.bl
5.4.t1
no
YES
5.4.t1
batt
94%