Hardware; Functional Block Diagram; Connectors; Captivate-Emc Overview - Texas Instruments CAPTIVATE-EMC Getting Started Manual

Hardware

3 Hardware
The following sections describe the CAPTIVATE-EMC hardware (see
of the hardware, see the CAPTIVATE-EMC hardware description in the
3.1

Functional Block Diagram

Figure 3 shows the CAPTIVATE-EMC functional block diagram.
3.2

Connectors

There are two connectors on the CAPTIVATE-EMC board:
• DC power supply connector
• 20-pin debug connector
4
CAPTIVATE-EMC Getting Started Guide
Figure 2. CAPTIVATE-EMC Overview
Figure 3. CAPTIVATE-EMC Block Diagram
Copyright © 2019, Texas Instruments Incorporated
Figure 2). For a detailed description
CapTIvate Technology
SLAU821 – October 2019
Submit Documentation Feedback
www.ti.com
Guide.