Overview Of Replacing Components; Required Tools And Parts For Replacing Hardware Components On The Srx650; Services Gateway; Table 38: Tools And Parts Required For Replacing Services Gateway Hardware - Juniper SRX650 Hardware Manual

CHAPTER 22

Overview of Replacing Components

Required Tools and Parts for Replacing Hardware Components on the SRX650 Services
Gateway
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Required Tools and Parts for Replacing Hardware Components on the SRX650 Services
Gateway on page 141
To replace hardware components, you need the tools and parts listed in
Table 38 on page 141.

Table 38: Tools and Parts Required for Replacing Services Gateway Hardware

Components
Tool or Part
3/8 in. nut driver or pliers
Blank panels (if component is not reinstalled)
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD) grounding wrist
strap
Flat-blade (–) screwdriver
Phillips (+) screwdrivers, numbers 1 and 2
Wire cutters
Removing the Fan Tray on the SRX650 Services Gateway on page 151
Components
Cables and connectors
Power supply
SRE and multi-use processor
GPIMs
SRE
GPIMs
All
Cables and connectors
Air filter
Cables and connectors
Blank panels
Fan tray
GPIMs
SRE
Cables and connectors
141