True View Evo - GeoCue True View 410 Hardware User's Manual

True View 410 Hardware User Guide

TRUE VIEW EVO

True View Evo is a 64-bit Windows® desktop application used for processing and exploiting True View
sensor data. It is GeoCue's LP360 point cloud exploitation product with the addition of a collection of
tools for True View sensor data workflows. Currently, True View Evo is available in two licensing levels:
•
True View Evo – This is equivalent to
workflow tools. It is limited to product areas of no more than 4 km
•
True View Evo Unlimited – this is the same functionally as True View EVO but the size limit is
removed.
True View EVO is the software used to post-process your raw flight data. EVO will generate a 3D LIDAR
point cloud in LAS format, colorize the point cloud, and geotag the images collected. It is based on
GeoCue's LIDAR point cloud exploitation software, LP360, and comes with all the
Advanced. Tools such as accuracy assessment, automatic and manual ground classification, and
contour/ surface exporting.
29
LP360 Advanced with the addition of the True View
True View 410 Hardware User Guide
2
of LIDAR data
same tools as LP360
8/3/2020