GeoCue True View 410 Hardware User's Manual page 38

True View 410 Hardware User Guide
30. Ensure landing area is still clear; complete the landing via Return to Home or manually
as preferred.
31. After landing, turn off M600.
32. Verify SYS light is flashing yellow (transferring data).
33. Monitor the True View SYS LED; flashing Yellow means data is being copied to USM;
solid Yellow data copy is complete. Wait for solid Yellow.
34. Power True View OFF using main power switch in battery compartment (door must be
open to toggle). Never power OFF while SYS LED is still blinking indicating a copy
operation is in progress; data loss will occur.
35. Remove USM memory stick and pass to post-processing.
38 True View 410 Hardware User Guide 8/3/2020