Johnson Controls IQ Panel User Manual page 7

USING YOUR SYSTEM: DISARMING
Disarming your System
When your system is armed, there are multiple ways to disarm:
Disarming Manually
To manually disarm your panel, touch the icon in the center of the
screen. You will be prompted to enter a valid code. Failure to
enter a valid code with the time required will trigger the alarm.
When someone manually disarms the panel the built in
camera will take a photo and save it on the camera page
along with the date, time, and name of the user.
Disarming Remotely
To remotely disarm your panel, login to your mobile app and touch
the "disarm" icon.
Disarming Automatically
You can connect your smartphone using Bluetooth and it will
automatically disarm your IQ Panel from an "Armed Away" state when it
comes within range. To connect a phone, follow the steps shown.
Note: Remote disarming has not been evaluated by UL/cUL
Touch to disarm
panel manually
Download the
Alarm.com app
in the App store
or Google Play
Bluetooth
Touchless
Disarming
Step 1:
Swipe down to
access settings
tray
Step 2:
Touch "SETTINGS"
Step 3:
Touch "ADVANCED SETTINGS"
Step 4:
Enter your code
Step 5:
Touch "BLUETOOTH DEVICES"
Step 6:
Put your Bluetooth device in "pairing"
mode.
Step 7:
Touch "ADD DEVICE" The panel
will begin searching for new
devices in range (It may take up
to 60 seconds)
Step 8:
Select your device from the list
Step 9:
Pair
Touch "Pair"
Step 10:
When the messages appear on your
phone and IQ Panel, ensure the numbers
match and touch "Pair" on each.
Bluetooth Pairing Request
BLUETOOTH PAIRING REQUEST
"IQ-Panel" would like to pair
Device: My Phone
with your phone. Confirm that Pairing Code: 12345
the code "12345" is shown on
CANCEL
the "IQ-Panel".
Pair
Cancel
*You can connect up to five (5) smartphones for
touchless disarming. You may need to enable this
setting in your Bluetooth settings.
PAIR