Johnson Controls IQ Panel User Manual page 10

USING YOUR SYSTEM: SETTINGS
HOW TO ACCESS:
Security Status
See your panel's
security status in the
upper right. Touch it
to go directly to the
security page
Volume
Slide left/right to adjust
the panel voice
Settings
Touch to access the
full settings page.
From there you can
also access
"Advanced
Settings" (which will
require a passcode)
Messages & Alerts
Touch to access the message
center including your
provider's contact information,
video tutorials, and system
messages
SOUND DISPLAY
Z-WAVE DEVICES OTHER Z-WAVE
STATUS DEVICES
Photo Frame
Touch to access the
photo frame where you
can customize the
panel's screensaver
SD CARD WEATHER STATUS
TEMPERATURE
AUTOMATION
ACTIVITY MONITOR ADVANCED
SETTINGS
Settings Tray
Access common settings by swiping down
from the top of the screen.
Close Tray Clean Screen
Swipe up to Disables the screen for 30 seconds
close the tray to allow you to clean it without
accidentally touching anything.
(Touch the "standby" button on the
side of the panel to cancel)
Settings Page
From here you can adjust individual sound
settings, change your weather temperature
from Fahrenheit to Celsius, see the status of
your security and smart home devices, and
more.
Advanced Settings
Only the Master code can access this area.
From here you can manage users, run system
tests, reboot your system, connect Bluetooth
and Wi-Fi and more.
Battery & Radios
Touch an icon to get
more information
-Battery level
-Wi-Fi connection
-Bluetooth status
-LTE connection
Brightness
Slide left/right to
adjust the screen
brightness
Language
Touch to change
panel language