Fcc/Ic Statement - Johnson Controls IQ Panel User Manual

LEGAL
The IQ Panel 2 integral communicators are compatible with the following receivers: Sur-Gard System I-IP
Receiver, version 1.41+. Sur- Gard System II Receiver, version 2.14+, Sur-Gard SG-DRL3-IP, version 2.36+ (for
Sur-Gard System III Receiver), Sur-Gard SG-DRL4-IP version 1.29+ (for Sur-Gard System IV Receiver), and Sur-
Gard SGDRL5-IP version 1.04+ (for Sur-Gard System 5 Receiver).
1. The IQ Panel 2 integral communicator is monitored by the control panel and it is programmed via the
programming menu available from the website portal.
2. The HSPA 3G/LTE Cellular path is immune to conducted and radiated RF fields with levels up to 10V/m
as tested per EN50130-4 Standard.
3. The IQ Panel 2 integral communicator conforms with radiated emissions levels for Class B equipment as
per standards EN61000-6-3/EN55032/CISPR32.
4. The IQ Panel 2 integral communicator has one cellular communication path using 900/1800/2100 MHz
Public Cellular Network and one Wi-Fi 2.4GHz communication path. It can use on the cellular path (SP2)
or both in backup configuration (DP1, using cellular as primary path and Wi-Fi as back-up).
5. The IQ Panel 2 integral communicator used AES128 encryption algorithm for communication with
compatible receivers. The AES 128 encryption of data communication ensures substitution and
information security.
6. The IQ Panel 2 integral communicator has been tested for compliance in conjunctions with the
following applicable standards: EN50136-1:2012, EN50136-2:2013, EN50131-10:2014, ATS configuration:
SP2 and DP1.
For EN50131-1:2006/A1:2009/A2:2017 compliant installations, the following programming options shall be set
as described: Test transmission interval set to 24h for SP2 and DP1 configuration.
IQ Panel 2 integral communicator has been certifies by Telefication in accordance with EN50131-1:2006/
A1:2009/A2:2017, EN50131-10:2014 requirements for Grade 2, Class I and EN50136-2:2013 Configuration: SP2,
DP1.

FCC/IC STATEMENT

Changes or modifications not expressly approved by Qolsys can void the user's authority to operate the Product. This
Product has been tested and found to comply with FCC Rules.
This Product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this Product does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the Product and receiver.
3. Connect the affected equipment and the Product to separate outlets, on different branch circuits. Consult the dealer
or an experienced radio/TV technician for help.