Johnson Controls IQ Panel User Manual page 11

USING YOUR SYSTEM: ADVANCED SETTINGS
Advanced Settings: Can only be accessed using the Master code.
Master Settings
Choose your first and
second preferred languages
to be toggled from the
settings tray (see previous
page) and require dealer or
installer permission to
access panel settings
Panel Reboot
Use this option if needing
to restart your panel. If
you're experiencing
problems with your
system, try performing a
panel reboot. Often times,
a system restart can help a
system run more smoothly.
Power Down
Use this option if needing
to shut the system down
for any reason. Shutting
the system down any
IQ Remote Devices
other way can cause
From here, you can test
potential issues.
Remote Wi-Fi signal
strength and rediscover
Remotes that have lost
connection.
Important Note
If for some reason you are unable to access the settings
!
screen and need to reboot the system, you can do a hard
reboot by holding the power button on the side for 30
seconds. This should only be done if absolutely necessary.
User Management
About
Program up to 242
View important information
individual user codes for
about your system such as:
each person that needs
current software version,
access to the system.
IMEI, hardware version, etc.
Assign a name to each
This is a great place to look
code so that you know
if troubleshooting an issue
who disarmed the system.
with Tech Support.
Access Point Settings
Enable and disable access
point for use with Wi-Fi
devices. Check with your
dealer before enabling or
disabling or you could cause
devices to loose connection.
System Tests
Perform various system test
to ensure your system is
working properly. This is
another great place to go if
troubleshooting an unknown
issue with the system.
Bluetooth Devices
Easily turn on the bluetooth
radio from here. This allows
you to use the touch-less
disarming feature. You can
add, delete and edit your
devices from here.
For additional help and questions
on Advanced Settings, please
reach out to your security dealer.
Edit Sensor
Don't like the names of your
sensors? Easily customize
your sensor names from
here. You can also adjust
the chime type and turn
Voice Prompts on and off
from here.
Sound
From the sound menu,
you can adjust the
volumes to your panel
voices, beeps and
chimes, and video
tutorials. You can also
edit sensor chimes, Z-
Wave device prompts,
Trouble Beeps and
touch sounds.
Wi-Fi
Connect the system to an
internet connection to ensure
the panel has a second path of
communication. This will help
speed up the communication
time to the central station and
greatly improve speed when
controlling home automation.