6Axr - Canon WUX450 User Commands

6AXR

6-axis adjustment (red), hue/saturation/brightness
Format
Setting Command
Response
Reference Command
Response
<R hue:Number> is within -20 to 20
<R saturation:Number> is within -20 to 20
<R brightness:Number> is within -20 to 20
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) When 6-axix adjustment is turned on, these settings are shown over the displayed image.
However, the settings can be changed regardless of whether 6-axis adjustment is turned on or
not.
(2) This sets the currently selected input signal and image mode.
WUX450 / WX520 / WUX400ST / WX450ST User Commands
6AXR=<R hue:Number>,<R saturation:Number>,
<R brightness:Number>
i:OK
GET=6AXR
g:6AXR=<R hue:Number>,<R saturation:Number>,
<R brightness:Number>
Note: See "Error list" for any response other than the above.
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
- 14 -
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes