To Play The Contents Between The Specified Points Repeatedly (A-B Repeat); To Select A Title From The Top Menu Of The Disc - Sharp SD-AT100W Operation Manual

[Back]
[Front]
" To play the contents between the specified
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying it during playback.
1
Whilst the disc is playing, press the A
- B REPEAT button.
This registers the start point (A).
2
Press the A - B REPEAT button again.
This starts A-B repeat from the start point (A) to the end point (B).
To cancel A - B repeat play:
Press the A - B REPEAT button.
Notes:
! A-B repeat play is disabled on some discs.
! A-B repeat play is possible only within a title.
! A-B repeat function does not operate on the portion with multiple angles.
! A-B repeat play is not possible during the programmed playback.
" To select a title from the top menu of the
disc
On a DVD with multiple titles, you can select a title from the top menu.
1
Whilst the disc is stopped, press the
TOP MENU button to display its title
menu.
2
Use the , , or button to select the title, and then press the EN-
TER button.
! The selected title is played.
! Depending on the disc, a title can be selected by pressing the direct buttons
(0 - 9) on the back of the remote control.
Notes:
! The procedure shown here provides only general steps. The actual procedure for
using the title menu depends on the disc you are using. See the disc jacket for
details.
! If the disc you are using does not have a title menu, nothing appears on the
screen.
02/2/27 SD-AT100W(X)E4.fm
SD-AT00W
ENGLISH
2 5 / A
8 3 / 0
D D V
0 1 : 3 0 0 8 :
2 5 / A B
8 3 / 0
D D V
0 1 : 3 0 0 8 :
Example
1 Drama 2 Action
3 SF 4 Comedy
E-38
4