Turning The Power On - Sharp SD-AT100W Operation Manual

TV connection (continued)
SD-AT100W
ENGLISH
To listen to the TV sound via the speakers of this unit:
Using the audio cable, you can listen to the TV sound with this unit.
(The audio cable is not supplied. Purchase a commercially available cable.)
TV
Note:
For TV sound operations, refer to page 60.
E-17

Turning the power on

After checking all the connections have been made correctly, connect the AC power
lead to the AC power input socket, then plug the AC power lead of this unit into the
wall socket.
To audio
input sockets
Red White
Notes:
" Never use a power lead other than the one supplied. Otherwise, a malfunction or
an accident may occur.
" Unplug the unit if it is not to be used for a prolonged period of time.
! To turn the power on
Audio cable
(not supplied )
Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Red White
To audio
output sockets
Power indicator
02/2/27 SD-AT100W(X)E2.fm