Table of Contents
Advertisement
Useful operation (continued)
HT-M700H
To play the contents between the specified
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying it during
playback.
1
Whilst a disc is playing, press the SHIFT button and then
the A
B REPEAT/
TV screen
A-B Set A
This registers the start point (A).
2
Press the SHIFT button and then the A
ton again to enter the end point (B).
A-B Repeat on
A-B repeat plays from the start point (A) to the end point (B).
3
Press the SHIFT button and then the A
ton to return to the normal playback.
Notes:
A-B repeat play is disabled on some discs.
Some scenes in DVD may not allow A-B repeat play.
A-B repeat play for DVD is possible only within a title.
A-B repeat play for super video CD, video CD, audio CD and
DivX disc is possible only within a track.
When you press the
celled. (For DVD, press the
33
button.
Unit display
B REPEAT/ but-
B REPEAT/ but-
button, the current A-B repeat play is can-
button twice.)
To change the display on the unit
During playback, press the DISPLAY/(-DIMMER) button.
Each time you press the button, the display changes as follows:
DVD:
Title elapsed time
Chapter number
SVCD/VCD/CD:
Track elapsed time
Total elapsed time
Notes:
Title/chapter numbers or elapsed time may not appear depend-
ing on the disc.
The playing time of the disc specified on the jacket, etc. may not
include silence between tracks, and may differ from that dis-
played on the unit.
Elapsed time on the display does not indicate the actual time.
When operating super video CD or video CD with the P.B.C.
function, set the P.B.C. to off (see page 37).
Title/
Chapter elapsed time
Advertisement
Table of Contents
Troubleshooting
