Sharp SD-AT100W Operation Manual page 65

" DVD/CD player
Symptom Possible cause
Even though a disc has been ! Is the disc loaded upside down?
loaded, "NO DISC" or "NO
! Is the disc very dirty?
PLAY" is displayed.
Playback sounds are ! Does the disc satisfy the standards?
skipped.
! Is the unit located near excessive vi-
brations?
! Has condensation formed inside the
unit?
The track number, etc. are ! Is the input not set to DVD?
not displayed when a disc is
loaded.
The control buttons do not ! Is the disc very dirty?
function. Music or video play-
! Does the disc satisfy the standards?
back is interrupted.
! Is the unit located near excessive vi-
brations?
! Has condensation formed inside the
unit?
Pictures and sound are ! Is the disc very dirty?
skipped.
! Is the unit located near excessive vi-
brations?
! Has condensation formed inside the
unit?
The unit does not operate ! Is a disc other than DVD (having re-
even if the power is on. gion number on the back of the unit
or "ALL"), video CD or audio CD
loaded?
Image cannot be played ! Are the video and audio cables con-
back. (Sound is not heard.) nected improperly?
! Is a disc other than DVD (having re-
gion number on the back of the unit
or "ALL"), video CD or audio CD
loaded?
! Is the disc very dirty?
! Is the disc loaded upside down?
! Clean the optical pickup if it is dirty.
! Is the TV input set to "VIDEO 1/VID-
EO 2" etc.?
! Is the unit turned on?
" Remote control
Reference
Symptom
page
The remote control does not
operate properly.
P. 64
P. 21
The unit cannot be turned on
with the remote control.
P. 64
" Condensation
P. 64
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (laser pickup, etc.) or on the trans-
P. 6 mitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the unit.
P. 15, 17
P. 5, 6
P. 65
P. 60
P. 17
02/2/27
Possible cause Reference
page
! Is the battery polarity respected? P. 20
! Are the batteries dead?
! Is the distance or angle incorrect? P. 20
! Are there any obstructions in front of
the unit?
! Is the remote control sensor ex- P. 20
posed to strong light (inverter fluo-
rescent light, direct sunlight, etc.)?
! Is the remote control for another
equipment used simultaneously?
! Are buttons on the front and back
faces of the remote control pressed
simultaneously?
! Is the AC power lead of the unit P. 17
plugged in?
! Are the batteries inserted? P. 20
SD-AT100W(X)E7.fm
SD-AT00W
ENGLISH
4
E-64