Sharp SD-AT100W Operation Manual page 60

Connecting other equipment (continued)
SD-AT00W
ENGLISH
! Using alternate subwoofer
The bass sound can be emphasised by connecting a commercially available sub-
woofer.
Commercially available subwoofer
(amplifier built in)
Notes:
" No sound is heard from the speaker in which an amplifier is not built in.
" By changing the speaker settings, both the supplied and separately purchased
subwoofers can be set simultaneously.
E-59
! Headphones
" Before plugging in or unplugging the headphones, reduce the volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
" You cannot use the surround feature with headphones.
To subwoofer
output socket
Audio cable
(commercially available)
To subwoofer
input socket
02/2/27 SD-AT100W(X)E6.fm