Tv Connection - Sharp SD-AT100W Operation Manual

TV connection

SD-AT100W
ENGLISH
This unit has two sokets to output images in addition to the MONITOR OUT
(VIDEO)socket. To enjoy clearer DVD images, connect your TV to these
sokets.
MONITOR OUT (S-VIDEO)
socket:
COMPONENT VIDEO OUT
socket:
Connecting to TV with video cable:
Connecting to TV with S-video cable:
(See page 16.)
Connecting to TV with Component video cable:
(See page 16.)
E-15
Transmits the image signal by dividing it into the lu-
minance signal (Y) and the color signal (C) to real-
ize clearer images than the video output socket.
Directly transmits the image information, which is
composed of the luminance signal (Y) and the com-
ponent signal (PB, PR) to ensure the fidelity of co-
lour compared with the S1 video output coket.
Video cable (supplied)
TV
S-video cable (not supplied)
TV
Component video cable (not supplied)
TV
Caution:
Before connecting the TV, turn off all the equipment.
! Connecting to TV with video cable
Move the VIDEO OUT SELECTOR switch to S-VIDEO/VIDEO.
TV
Notes:
" Change the TV input in accordance with the connected socket.
" Do not connect other equipment between the TV and this unit. If they are con-
nected via a VCR, pictures may be distorted.
" You need the PAL-compliant TV to watch DVD/Video CDs recorded in PAL sys-
tem.
02/2/27 SD-AT100W(X)E2.fm
To video output socket
Video cable
(supplied)
To video input
socket