General Control - Sharp SD-AT100W Operation Manual

General control

[Front]
! Volume control
Press the VOLUME button to increase the volume and the VOLUME
decreasing.
.....
0 1 2
! Bass control
When the X-BASS button is pressed, the current mode setting will be displayed. To
change to a different mode, press the X-BASS button.
Bass frequencies are
emphasised.
This function is enabled only when the sound mode is set to "STEREO" or "VIR-
TUAL" (page 49).
! To change the display brightness (2 levels)
You can switch the display brightness by holding down the DISPLAY button on the
remote control for 2 seconds or more.
Dimmed
02/2/27 SD-AT100W(X)E2.fm
SD-AT100W
ENGLISH
button for
39 40
The sound is not modified.
Brightened
E-18
4