General Control - Sharp HT-SB603 Operation Manual

Remote control (continued)
USB connection
To operate the remote control without battery power,
connect a Micro USB cable (not supplied) to the remote
control DC IN terminal.
Connection of the USB cable to the remote control
disconnect the batteries.
Caution:
The USB connection cannot be used to charge the
remote control or as a media playback.
Test of the remote control (TV operation)
Point the remote control directly at the remote sensor on
the TV.
The remote control can be used within the range
shown below:
8" - 20'
(0.2 m - 6 m)
To power
source
Remote
sensor
15° 15°

General control

Make sure to enable the HDMI CEC when making
HDMI connection. For details, refer to the operation
manual of the TV.
To turn the power on
Press the ON/STANDBY button on the sound bar or the
button on the remote control.
The power turns on and the sound bar on/standby/
pairing/input indicator lights up according to the input
source. If the power does not turn on, check whether
the AC power cord is plugged in properly.
Input source
Bluetooth
Others
The system will automatically power on if TV or similar
component which supports HDMI CEC, is turned on.
To set the sound bar to standby mode:
Press the ON/STANDBY button on the sound bar or the
button on the remote control. The the sound bar on/
standby/pairing/input indicator turns red.
Notes:
A slight audio delay after TV is turned ON does not
mean that the system is faulty. This is normal.
"AQUOS speaker is enabled" message will be
displayed if SHARP LCD TV does not detect HT-SB603
during power on. However the message "AQUOS
audio with AQUOS LINK is enabled" will be displayed
soon as HT-SB603 is detected. These messages may
vary for other TV model.
Eco mode
The first time the unit is plugged in, it will enter the
STANDBY (eco) mode on.
To turn off/on the mode, select ECO MODE from the
remote control menu.
During STANDBY condition, NFC function is activated
once your device touches the supplied NFC tag when
there is no HDMI connection.
E-13
SOUND BAR HOME THEATER SYSTEM HT-SB603
Indicator
Turns blue.
Turns violet.