Advertisement
Quick Links
AURAJET™ HANDSET
Installation Guide
Technical Specifications:
Operating Pressure:
Min: 100kPa/1bar
Max: 500kPa/5bar*
Optimum: 150kPa/1.5bar - 500kPa/5bar
Operating Temperature:
Hot: Max 65°C*
Cold: Min 5°C
Inlet Connections:
½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
www.methven.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METHVEN AURAJET HANDSET
Summary of Contents for METHVEN AURAJET HANDSET
- Page 1 Installation Guide Technical Specifications: Operating Pressure: Min: 100kPa/1bar Max: 500kPa/5bar* Optimum: 150kPa/1.5bar - 500kPa/5bar Operating Temperature: Hot: Max 65°C* Cold: Min 5°C Inlet Connections: ½" BSP * Regional specific regulations apply. Please refer to your warranty statement at www.methven.com www.methven.com...
- Page 2 IMPORTANT: Please read all of the instructions before installation. General: • Methven recommends this product is installed by a licensed plumber in compliance with all relevant regional regulations. • After installation all connections must be checked for leaks. • All outlets used primarily for personal hygiene shall deliver water at a safe temperature as per regional regulations.
- Page 3 OVAL RAIL CARE AND CLEANING: Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with contamination free warm soapy water and a damp soft cloth. Clean filter washer periodically 439972 ISSUE A...
- Page 4 Slide the screws top and Filter Washer rail up or bottom. down to centralise Non-Swivelling Cone brackets. IF HANDSET, HOSE OR WATER OUTLET ARE SUPPLIED: Connect hose to water outlet and Methven handset. Ensure swivelling cone is connected to the handset.
Need help?
Do you have a question about the AURAJET HANDSET and is the answer not in the manual?
Questions and answers
What is the best way to clean the shower handset?
To clean the METHVEN AURAJET HANDSET:
1. Run hot water through the shower for 2 minutes before first use.
2. Clean regularly using warm soapy water and a damp soft cloth.
3. Do not use abrasives or abrasive cleaning agents.
4. Do not use products containing chlorine bleach or hydrochloric acid.
5. If lime-scale builds up, soak the handset in a limescale remover for up to 10 minutes.
6. Do not use sharp objects to remove limescale.
7. Always rinse thoroughly after cleaning to remove any cleaning products.
8. Do not insert objects into the spray slot or remove the spray cover.
9. Clean the filter washer in the hose cone periodically.
This answer is automatically generated