Reviewing Day Statistics on the
TRED30-16R
The review of day statistics history is accessed by pressing the
button
REVIEW
/MARK
You can review the data regardless of whether the recorder is still
logging data, or has already been stopped.
Following are some sample display screens you might see during a
statistics review. All display screens are based on the alarm settings
made in
Alarm Configuration Options
Today' s data
Pressing the
button displays the current day's maximum statistic:
The Today marker
l
that today's data are being displayed.
Today, no temperature values were recorded above the upper alarm
l
threshold, and no alarm event was generated ( ).
The maximum temperature recorded today was 4.8°C.
l
The paused function is enabled
l
Pressing the
button again displays the current day's minimum
statistic:
still flashes and 00
l
(today) is being displayed.
Today, no temperature values were recorded below the lower alarm
l
threshold, and no alarm event was generated.
The minimum temperature recorded today was 1.4°C.
l
Yesterday' s data
Pressing the
button now displays yesterday's maximum statistic:
The -1 marker
flashes and -01
l
yesterday's data is being displayed.
Yesterday, recordings above the upper threshold were recorded,
l
indicated by the upper alarm threshold marker
Distributed by MicroDAQ
Page 13 of 17
.
on page 5:
flashes and 00
is shown to indicate
DAYS
is still shown, as the same day's data
DAYS
is shown to indicate that
DAYS
the duration value shows the amount of time recorded above the
l
limit yesterday, which was 12 hours 30 minutes
an alarm was triggered, indicated by the , as this duration was
l
longer than the allowed time above the threshold
The maximum temperature recorded yesterday was 12.9°C.
l
Pressing the
still flashes and -01
l
at yesterday's data.
Yesterday, no temperature values were recorded below the lower
l
alarm threshold. The alarm for the day
upper alarm, not by the lower alarm, so a
minimum statistics.
The minimum temperature recorded yesterday was 2.0°C.
l
Data from the day before yesterday
Pressing the
days ago:
The
flashes and -02
l
being displayed is from two days ago.
Two days ago recordings above the upper threshold were recorded,
l
indicated by the upper alarm threshold marker
The duration was 1 hour 20 minutes, which was shorter than the
l
allowed period, so no alarm event was generated
The maximum temperature recorded on the day before yesterday
l
was 11.5°C.
Pressing the
days ago:
still flashes and -02
l
at the data from 2 days ago.
Yesterday, no temperature values were recorded below the lower
l
alarm threshold, and no alarm event was generated .
The minimum temperature recorded on the day before yesterday
l
was 7.8°C.
www.MicroDAQ.com
TRED30-16R Product User Guide, Revision 1.4, copyright © 2004-2017,
button now displays yesterday's minimum statistic:
still shows, as we are still looking
DAYS
button now displays the maximum statistic from two
is shown to indicate that the data
DAYS
button now displays the minimum statistic from two
still shows, as we are still looking
DAYS
(603) 746-5524
LogTag
was generated by the
is displayed in the
®
Recorders
. All rights reserved.
Need help?
Do you have a question about the TRED30-16R and is the answer not in the manual?