Subscribe to Our Youtube Channel
Related Manuals for LogTag Recorders TRED30-16R
Summary of Contents for LogTag Recorders TRED30-16R
- Page 1 LogTag Recorders Ltd TRED30-16R Temperature Recorder with Display and 30 Day Statistics Memory Product User Guide Document Release Version: 1.3 Published 1 September 2016 ® Copyright © LogTag Recorders , 2004-2016...
-
Page 2: Table Of Contents
16/06/2016 Stefan Lenz Trial with new display layout 1/9/2016 Stefan Lenz Issued for new TRED30-16R ® Page 2 of 16 TRED30-16R Product User Guide, Revision 1.3, copyright © 2004-2016, LogTag Recorders . All rights reserved. -
Page 3: Safety Information
… the device is stored and operated according to LogTag ® Recorders ’ recommendations. Disclaimer The TRED30-16R monitors temperature exposure and not the quality of the goods it accompanies. Its purpose is to signal if product quality evaluation/testing is required. Typographical Conventions Text refers to buttons on the TRED30-16R. -
Page 4: Introduction
The TRED30-16R temperature recorder features the familiar LogTag case layout. Configuring the TRED30-16R Before a TRED30-16R recorder can be used, it must be configured with the parameters required for starting and recording temperature ® values. This is done using LogTag Analyzer software, which is also used for downloading and analyzing data. -
Page 5: Standard Configuration Options
Begin recording after a delay. If you configure the TRED30-16R to start after a delay period, the then it turns off and the marker for the previous day is shown recorder will not immediately record temperature readings after... -
Page 6: Audible Alarm
Audible Alarm The TRED30-16R is fitted with a beeper, which can be enabled to provide extra feedback when an alarm event has been registered. This ® function is enabled when configuring the recorder with LogTag Analyzer, please see the Standard Configuration Options... -
Page 7: Display Overview
DELAY delay in hours and minutes. ALARM/OK indicator symbol is shown as soon as the TRED30-16R has registered an If the word is shown, the time value represents the DURATION length of time in hours and minutes an alarm threshold was alarm event. -
Page 8: Real Time Clock
Accept the minutes value by pressing . The hours value now flashes. ® Page 8 of 16 TRED30-16R Product User Guide, Revision 1.3, copyright © 2004-2016, LogTag Recorders . All rights reserved. -
Page 9: Starting The Recorder
READY Automatic date/time start If you configured the TRED30-16R for a date/time start, it will start recording temperature values as soon as the entered start time is reached. The recorder will display the following if a Date/Time Start has been... -
Page 10: During Recording
REVIEW /MARK During normal operation the display shows the most recently recorded by the TRED30-16R will be identified in the downloaded data with an temperature. This temperature is updated at the same rate as the inspection mark. logging interval. The current time is also displayed (in 24 hour format). -
Page 11: Sensor Is Disconnected
The display shows --.-, if the external sensor of the TRED30-16Ris disconnected. Figure 6: TRED30-16R recording, showing ‘18’ days of data has been collected. This function is useful if the sensor is permanently mounted , but you wish to take the TRED30-16R to a computer for downloading its data. -
Page 12: Reviewing Day Statistics On The Tred30-16R
Pressing the button now displays the minimum statistic from two Pressing the button now displays yesterday’s maximum statistic: days ago: ® Page 12 of 16 TRED30-16R Product User Guide, Revision 1.3, copyright © 2004-2016, LogTag Recorders . All rights reserved. -
Page 13: Stopping The Tred30-16R
LogTag Analyzer. Your distributor can supply more information about this option. Manually You can configure a TRED30-16R so it can be stopped with the button. This feature is useful when you take the START /CLEAR/STOP recorder out of a shipment and don’t want to falsify the statistics with... -
Page 14: Resetting The Recorder
Analyzer by clicking Hibernate on the LogTag menu. The disply shows SLP for a few seconds, before turning itself off. ® Page 14 of 16 TRED30-16R Product User Guide, Revision 1.3, copyright © 2004-2016, LogTag Recorders . All rights reserved. -
Page 15: Technical Specifications
Typically 1 year of operation with normal use (6 minute logging, statistics ® to the TRED30-16R. Please refer to the dedicated sensor page on the LogTag reviewed on the display no more than once daily for no longer than 30 seconds Recorders website. -
Page 16: Appendix 1 - Battery Replacement
Re-configure the recorder with LogTag Analyzer. Please recycle or dispose of the old battery according to your local environmental regulations. ® Page 16 of 16 TRED30-16R Product User Guide, Revision 1.3, copyright © 2004-2016, LogTag Recorders . All rights reserved.
Need help?
Do you have a question about the TRED30-16R and is the answer not in the manual?
Questions and answers