Sharp UX-84 Operation Manual page 46

all-UX84H.book Page 44 Wednesday, July 5, 2000 8:48 AM
Downloaded from: http://www.usersmanualguide.com/
Optional Answering Machine Settings
Fax reception on A.M. failure
If the memory for recording incoming messages becomes full while
you are out, the answering machine will no longer be able to record
messages. The ON A.M. FAILURE setting is used to choose the
response of the machine to incoming calls when this happens:
♦ Automatic fax reception NO: The UX-84 will answer after 20 rings,
after which it will wait to receive a remote command. Most callers will
hang up before it answers; however, when you call the UX-84 from a
remote location, you can wait until it answers, listen to your messages,
and then erase them (see Remote Operations in this chapter).
♦ Automatic fax reception YES: The reception mode will switch to
FAX mode, allowing the UX-84 to continue to receive faxes auto-
matically without broadcasting an OGM on answering. With this
setting, you can still use the remote commands to listen to your
messages and erase the message memory (see Remote Operations
in this chapter).
Automatic fax reception is set to NO at the factory before shipping. If
you want to set it to YES, press the panel keys as follows:
1
Press these keys:
The display will show:
A.M. SETTINGS
2
Press these keys:
The display will show:
ON A.M. FAILURE
44
FUNCTION
0