Table of Contents
Advertisement
all-UX84H.book Page 51 Wednesday, July 5, 2000 8:48 AM
Downloaded from:
http://www.usersmanualguide.com/
Overriding the answering machine
Your callers should follow the steps below to override the answering
machine.
1
Your caller calls the UX-84 from a
tone dial telephone. When the
outgoing message begins, they should
press the "#" key on their telephone.
• The caller will hear a short beep,
and the outgoing message will stop.
2
The caller should enter the override
code and "#" by pressing the
appropriate keys on their telephone.
• If an incorrect code is entered, the
caller will hear four beeps. He or
she must re-enter the correct code
within 10 seconds or the line will
be disconnected.
3
The UX-84 will make a special
ringing sound. Pick up the handset to
answer the call.
• If you do not answer within 30
seconds, the outgoing message will
play again and the caller can then
leave a message.
Override Ringing
5
5
4
(Example)
51
Advertisement
Table of Contents
