Table of Contents
Advertisement
all-UX84H.book Page 100 Wednesday, July 5, 2000 8:48 AM
Downloaded from:
http://www.usersmanualguide.com/
Caller ID
2
Press 1 to enter a number, or 2 to clear
a number. (If you pressed 2, go to
Step 4.)
3
Enter the phone number, including the
area code, by pressing the number
keys (max. of 20 digits).
4
Press the START/MEMORY key
and then the STOP key.
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function
described in Blocking Reception of Unwanted Faxes in this chapter to
block voice calls as well as fax receptions (the Anti Junk Fax function
normally only blocks faxes).
In this case, when a voice call or a fax transmission comes in from a
number you have specified as a "Junk Number", your fax will break
the connection as soon as it receives the calling phone number from
the caller ID service.
To use this function, enter the number in the Anti Junk Number List as
explained in Blocking Reception of Unwanted Faxes on the following
page.
Note: This function cannot be used on a number which is already
programmed in to the machine as a priority call number.
100
SET
CLEAR
1
or
2
STOP
START/
MEMORY
Advertisement
Table of Contents
