18: System - Roland XS-62S Reference Manual

18: SYSTEM

Menu item Value
HDCP OFF, ON
59 .94Hz, 50Hz
FRAME RATE
720p, 1080i, 1080p
SYSTEM FORMAT
OFF, ON
AUTO SCAN
(ENTER)
Menu item
AUTO SCAN TIME
SDI IN 1–SDI IN 4,
HDMI IN5, HDMI/ANLG IN 6
STILL/BKG IN 7, 8
SCAN TRANS TIME
0.0–1 .0–4.0sec
This specifies the order in which video channels are shown when using auto scan.
NORMAL
AUTO SCAN SEQ
RANDOM
MENU CONTEXT OFF,
This specifies whether the same video as the PGM/1 bus is sent to the AUX/3 bus (AUX link).
OFF
AUX LINKED PGM
AUTO LINK
MANUAL LINK
OFF, 75% COLOR BAR,
TEST PATTERN 100% COLOR BAR, RAMP,
STEP, HATCH
OFF
-20dB@1kHz : 1kHz
-10dB@1kHz : 1kHz
TEST TONE 0dB@1kHz : 1kHz
-20dB@1kHz : 400Hz
-10dB@1kHz : 400Hz
0dB@1kHz : 400Hz
Explanation
(bold text: default value)
This specifies whether HDCP is enabled (ON) or disabled (OFF). When set to "ON, "
copyright-protected (HDCP) video can be input. HDCP is also added to the video that is
output.
When "HDCP" is set to "ON, " no video is output via the SDI OUT connectors.
This sets the frame rate.
This specifies the system format for the XS-62S. The input and output formats of the
respective connectors are determined according to the system format, as shown in the
table below.
System format
The input format of the HDMI IN 5 connector is set independently by the "EDID" value for
"HDMI IN 5" (p. 3), regardless of the system format.
The input format of the HDMI IN 6 connector or RGB/COMPONENT IN 6 connector is
set independently by the "EDID" value for "HDMI/ANLG IN 6" (p. 4), regardless of the
system format.
* If OUTPUT ASSIGN (p. 4) is set to "MULTI-VIEW" for the HDMI OUT 3 connector, the
output format is fixed at "1080p. "
This sets the Auto Scan function on or off.
When this is set to "ON, " channels 1 through 8 are switched automatically.
The SCAN TIME menu items shown.
Value
OFF, 0–5–120sec Specifies the length of time that a video is shown when using auto scan.
OFF,
This specifies the length of the transition between video channels when using auto scan.
Switch sequentially in the order of channels 1–8.
Switch randomly.
If this is "ON, " the menu screen is switched to follow the operation of the controllers.
ON
* The controllers relevant to this function are the AUDIO MIXER [1]–[5/6] knobs, the cross-
point [1]–[8] buttons, the [PinP] button, and the [DSK] button.
When the [SW MODE] button is lighted in green, use the cross-point buttons (upper row)
to select the video of the AUX/3 bus.
AUX link is enabled, and the same video as the PGM/1 bus is sent to the AUX/3 bus.
Temporarily disabling AUX link
When the [SW MODE] button is lit green, pressing a cross-point button (upper line)
enables the video of the selected AUX/3 bus.
Re-enabling AUX link
AUTO LINK:
MANUAL LINK:
This specifies the test pattern.
This specifies the test tone.
Input format
SDI IN 1–4 connectors
1080p
1080p, 1080i
1080i 1080p, 1080i
720p 720p
Explanation
If this is "OFF, " video switching does not apply to that source.
0–120sec
When you operate the [TAKE] button etc. to switch the video of the
PGM/1 bus, AUX link is automatically enabled.
When the [SW MODE] button is lit green, pressing the selected (lit)
cross-point button (upper line) enables AUX link.
Output format
SDI OUT 1 and 2 connectors
HDMI OUT 1 and 2 connectors
1080p
1080i
720p
Menu List
19