16: Capture Image; 17: System - Roland V-60HD Reference Manual

Menu List

16: CAPTURE IMAGE

Menu item Value
SDI IN
CAPTURE SOURCE
HDMI/RGB IN 6
TARGET STORAGE NO STILL IMAGE
CAPTURE EXECUTE
(EXEC)
CAPTURE SHORTCUT DISABLE,

17: SYSTEM

Menu item Value
HDCP OFF, ON
FRAME RATE 59
720p, 1080i, 1080p
SYSTEM FORMAT
PGM/PST, A/B
PANEL OPERATION
(ENTER)
These specify whether panel lock is applied (ON) or not applied (OFF) for each individual button and knob.
PANEL LOCK
5 Press and hold the [EXIT] button and the [MENU] button at the same time (for 3 seconds or longer) to turn on panel lock.
This specifies the operation when the [OUTPUT FADE] button is pressed.
VIDEO
OUTPUT FADE TYPE
VIDEO&AUDIO
14
Explanation
(bold text: default value)
1–4, HDMI IN 5,
This specifies the input video to use for still-image capture.
This selects the memory to use as the destination for saving the captured still image.
1, STILL IMAGE 2
* A " " symbol is displayed for memory where a still image is already saved.
This captures a still image.
Enables (ENABLE) or disables (DISABLE) still image capture by button operations. If this is set
to "ENABLE, " you can capture a still image by long-pressing a cross-point [1]–[6] button.
ENABLE
Save-destination for still image
Operate a PGM/A bus cross-point button: STILL IMAGE 1
Operate a PST/B bus cross-point button:
Explanation
(bold text: default value)
This specifies whether HDCP is enabled (ON) or disabled (OFF). When set to "ON, " copyright-
protected (HDCP) video can be input. HDCP is also added to the video that is output.
* When "HDCP" is set to "ON, " no video is output via the SDI OUT connectors.
94Hz, 50Hz This sets the frame rate.
This specifies the system format for the V-60HD. The input and output formats of the respective
connectors are determined according to the system format, as shown in the table below.
5 The input format of the HDMI IN 5 connector is set independently by the "EDID" value for
5 The input format of the HDMI IN 6 connector or RGB/COMPONENT IN 6 connector is set
5 The output format at the MULTI-VIEW connector is fixed at "1080p" and cannot be changed.
This sets the operation mode for video transitions.
The PANEL LOCK menu items shown.
Menu item Value
ALL SW & VOLUME OFF, ON
MENU SW + EXIT SW OFF, ON
VALUE ENCODER OFF, ON
PGM/A 1–8 SW OFF, ON
PST/B 1–8 SW OFF, ON
AUX/MEMORY 1–8 SW OFF, ON
MODE SW OFF, ON
CUT SW + AUTO SW OFF, ON
VIDEO FADER OFF, ON
OUTPUT FADE SW OFF, ON
DSK ON/OFF SW OFF, ON
COMPOSITION BLOCK OFF, ON
TRANSITION BLOCK OFF, ON
DSK BLOCK OFF, ON
AUDIO IN 1–6 VOLUME OFF, ON
AUTO MIXING SW OFF, ON
MASTER OUTPUT VOLUME OFF, ON
Buttons and knobs for which panel lock is applied (ON) are locked.
Fade-ins and fade-outs are applied only to video.
Fade-ins and fade-outs are applied simultaneously to video and audio.
Input format
System format
SDI IN 1–4 connectors
1080p 1080p, 1080i
1080i 1080p, 1080i
720p 720p
"HDMI IN 5" (p. 3), regardless of the system format.
independently by the "EDID" value for "HDMI/RGB IN 6" (p. 4), regardless of the system format.
Explanation
All buttons and knobs
[MENU] [EXIT] buttons
[VALUE] knob
PGM/A bus cross-point [1]–[8] buttons
PST/B bus cross-point [1]–[8] buttons
AUX/MEMORY buttons (All)
[MODE] button
[CUT] and [AUTO] buttons
Video fader
[OUTPUT FADE] button
[DSK] button
[H/PGM-CTR][V/PST-CTR] knobs, [PinP 1][PinP 2][SPLIT] buttons
[MIX][WIPE 1][WIPE 2] buttons, [TIME] knob
[LEVEL][GAIN] knobs, [PVW] button
AUDIO INPUT LEVEL knobs (All)
[AUTO MIXING] button
[MASTER OUTPUT] knob
STILL IMAGE 2
Output format
SDI OUT 1 and 2 connectors
HDMI OUT 1 and 2 connectors
1080p
1080i
720p