17: System - Roland XS-62S Reference Manual

17: SYSTEM

Value (bold text: default
Menu item
value)
HDCP OFF, ON
59
FRAME RATE
SYSTEM FORMAT 720p, 1080i, 1080p
AUTO SCAN OFF, ON
AUTO SCAN TIME 1sec–5sec–120sec
MENU CONTEXT
OFF,
OFF, 75% COLOR BAR,
TEST PATTERN
100% COLOR BAR, RAMP,
STEP, HATCH
OFF, -20dB@1kHz,
TEST TONE
-10dB@1kHz, 0dB@1kHz
PANEL OPERATION PGM/PST, A/B
Explanation
This specifies whether HDCP is enabled (ON) or disabled (OFF). When set to "ON, "
copyright-protected (HDCP) video can be input. HDCP is also added to the video that is
output.
When "HDCP" is set to "ON, " no video is output via the SDI OUT connectors.
94Hz, 50Hz
This sets the frame rate.
This specifies the system format for the XS-62S. The input and output formats of the
respective connectors are determined according to the system format, as shown in the
table below.
System
format
1080p
1080i
720p
The input format of the HDMI IN 5 connector is set independently by the "EDID" value for
"HDMI IN 5" (p. 3), regardless of the system format.
The input format of the HDMI IN 6 connector or RGB/COMPONENT IN 6 connector is set
independently by the "EDID" value for "HDMI/ANLG IN 6" (p. 5), regardless of the system
format.
* If OUTPUT ASSIGN (p. 5) is set to "MULTI-VIEW" for the HDMI OUT 3 connector, the
output format is fixed at "1080p. "
This turns on/off the function that automatically switches the video of channels 1–6.
This sets the time (seconds) of the automatic video switching
This turns on/off the function that switches the menu screen according to the controllers
that are operated.
ON
* The controllers relevant to this function are the AUDIO MIXER [1]–[5/6] knobs, the cross-
point [1]–[8] buttons, the [PinP] button, and the [DSK] button.
This specifies the test pattern.
This specifies the test tone.
This sets the operation mode for video transitions.
Input format Output format
SDI OUT 1 and 2 connectors
SDI IN 1–SDI IN 4
connectors
HDMI OUT 1 and 2 connectors
1080p, 1080i 1080p
1080p, 1080i 1080i
720p 720p
23
Menu List