17: System - Roland V-8HD Reference Manual

17: SYSTEM

Menu item Value
HDCP OFF, ON
FRAME RATE 59.94, 50, 60Hz
SYSTEM FORMAT
720p, 1080i,
Specifies the function of the [CUT] button.
H AUTO TAKE
H AUTO TAKE I
H CUT
CUT SW ASSIGN
H CUT I
H TRANSFORM
Specifies the function of the [AUTO] button.
AUTO TAKE I
H AUTO TAKE I
CUT I
AUTO SW ASSIGN
H CUT I
TRANSFORM I
PANEL OPERATION A/B, PGM/PST
ENTER
Enable (ON) or disable (OFF) the panel lock.
PANEL LOCK
(Bold: default)
1080p
Menu item Value
ALL SW & VOLUME OFF, ON
OFF, ON
A/PGM 1–8 SW
B/PST 1–8 SW OFF, ON
CUT SW OFF, ON
AUTO SW OFF, ON
MODE SW OFF, ON
OFF, ON
AUX SW
PinP 1 SOURCE SW OFF, ON
PinP 2 SOURCE SW OFF, ON
OFF, ON
MEMORY SW
TRANSITION SW OFF, ON
OFF, ON
VIDEO FADER
SPLIT/VFX A BLOCK OFF, ON
SPLIT/VFX B BLOCK OFF, ON
PinP 1 BLOCK OFF, ON
PinP 2 BLOCK OFF, ON
OFF, ON
DSK BLOCK
USER 1 SW OFF, ON
USER 2 SW OFF, ON
CAPTURE IMAGE SW OFF, ON
OUTPUT FADE OFF, ON
Explanation
Specifies whether HDCP is enabled (ON) or disabled (OFF).
When set to "ON, " copyright-protected (HDCP) video can be input.
HDCP is also added to the video that is output.
* When you change the setting, the change is not applied until you press the
[VALUE] knob to confirm.
Specifies the frame rate.
* When you change the setting, the change is not applied until you press the
[VALUE] knob to confirm.
Specifies the system format for the V-8HD.
* When you change the setting, the change is not applied until you press the
[VALUE] knob to confirm.
When the video of the B/PST bus is selected, switches to the video of the A/PGM
bus.
Switches the video between A/PGM bus and B/PST bus.
When the video of the B/PST bus is selected, switches to the video of the A/PGM
bus as a cut.
Switches the video between A/PGM bus and B/PST bus as a cut.
Switches to the video of the A/PGM bus as a cut only while you're holding
down the button.
When you release your finger from the button, the program output video returns.
When the video of the A/PGM bus is selected, switches to the video of the B/PST
bus.
Switches the video between A/PGM bus and B/PST.
When the video of the A/PGM bus is selected, switches to the video of the B/PST
bus as a cut.
Switches the video between A/PGM bus and B/PST as a cut.
Switches to the video of the B/PST bus as a cut only while you're holding down
the button.
When you release your finger from the button, the program output video returns.
Specifies the operation mode for video transitions.
Displays the following PANEL LOCK menu.
Explanation
(Bold: default)
Turns on/off the settings of the following buttons and knobs in a single action.
Cross-point A [1]–[8] buttons
Cross-point B [1]–[8] buttons
[CUT] button
[AUTO] button
[MODE] button
AUX [1]–[8] button
PinP 1 [1]–[8] button
PinP 2 [1]–[8] button
MEMORY [1]–[8] button
[TRANSITION] button
Video fader
SPLIT/VFX [A] knob/button
SPLIT/VFX [B] knob/button
PinP 1's [POSITION H] knob, [POSITION V] knob, [PVW] button, [ON] button
PinP 2's [POSITION H] knob, [POSITION V] knob, [PVW] button, [ON] button
DSK's [LEVEL] knob, [GAIN] knob, [PVW] button, [ON] button
USER [1] button
USER [2] button
[CAPTURE IMAGE] button
[OUTPUT FADE] knob
Menu List
67