Kenwood KTF-2010 Instruction Manual page 17

Specifications
KTF-2010
FM tuner section
Tuning frequency range ......................... 87.5 M Hz ~ 108 M Hz
Usable sensitivity (DIN)
M ONO ....... 1.3µV(75 Ω)/ 13.5 dBf(40 kHz dev., S/ N 26 dB)
STEREO ..... 50µV(75 Ω)/ 45.2 dBf(46 kHz dev., S/ N 46 dB)
Limiting level (DIN) ................................ 1.0µV(75 Ω)/ 11.2 dBf
Total harmonic distortion (DIN at 1 kHz)
M ONO .............................................. 0.1 % (65.2 dBf input)
STEREO ........................................... 0.3 % (65.2 dBf input)
Signal to noise ratio
(DIN w eighted at 1 kHz, 40 kHz dev.)
M ONO ............................................. 69 dB (65.2 dBf input)
STEREO .......................................... 61 dB (65.2 dBf input)
Stereo separation (DIN)
1 kHz ........................................................................... 45 dB
Capture ratio .................................................................. 2.0 dB
Selectivity (DIN ±300 kHz) .............................................. 60 dB
Image rejection ratio (at 98M Hz) ................................... 80 dB
IF rejection ratio (at 98M Hz) ......................................... 100 dB
Spurious rejection ratio (at 98M Hz) ............................ 100 dB
AM suppression ratio ..................................................... 68 dB
Sub carrior suppression ratio (DIN) ............ 55 dB (at 19 kHz)
Frequency response
(30 Hz ~ 15 kHz) ....................................... +0.5 dB, –2.0 dB
Output level / impedance (FM at 1 kHz, 75 kHz dev.)
Fixed ............................................................... 0.6 V/ 1.3 kΩ
1. KENW OOD follow s a policy of continuous advancem ents in developm ent. For this reason specifications m ay be changed w ith-
out notice.
Note Note
2. The full perform ance m ay not be exhibited in extrem ely coud location (under a w ater-freezing tem perature).
Downloaded from: http://www.usersmanualguide.com/
M W (AM ) tuner section
Tuning frequency range .......................... 531 kHz ~ 1,602 kHz
Usable sensitivity
Signal to noise ratio
Total harmonic distortion ................................................ 0.4 %
Image rejection ratio ....................................................... 30 dB
Selectivity ......................................................................... 30 dB
Output level / impedance
LW (for U.K. only) tuner section
Tuning frequency range ............................. 153 kHz ~ 279 kHz
Usable sensitivity
Signal to noise ratio
Total harmonic distortion ................................................. 0.6%
Image rejection ratio ........................................................ 27 dB
Selectivity ......................................................................... 33 dB
65 dB (at 38 kHz) Output level/ impedance
GENERAL
Pow er consumption .......................................................... 10 W
Dimensions ......................................... W : 440 mm (17-5/ 16")
Weight (net) ...................................................... 3.3 kg (7.26 lb)
(at 30 % mod., S/ N 20 dB) .................... 12 µV/ (400 µV/ m)
(at 30 % mod., 1mV input) ......................................... 50 dB
(at 30 % mod., 1mV input) .......................... 0.18 V/ 1.3 kΩ
(at 30% mod., S/ N 20 dB) .......................................... 22µV
(at 30% mod., 1mV input) ........................................... 47dB
(at 30% mod., 1mV input) ............................ 0.18 V/ 1.3 kΩ
KTF-3 0 1 0 / KTF-2 0 1 0 (En)
17
H : 94 mm (3-11/ 16")
D : 384 mm (15-1/ 8")