Kenwood KTF-2010 Instruction Manual page 11

Receiving a preset station
Receiving a preset station
1
Set to the Call up (Sellect) mode.
2
Select one of the preset numbers.
When you stop turning the knob, you tune in on the preset
station.
Instead of steps 1 and 2, you can use the numeric keys
(0~9,+10), to store the broadcast stations.
Press the numeric keys (0 to 9, +10) in the
follow ing order.
To select " 15" ... 0 , 5
To select " 20" ... 0 , 0 , )
M emory back up
Even if the pow er cord is unplugged from the AC outlet, the
preset memory contents w ill be backed up for 3 days.
Downloaded from: http://www.usersmanualguide.com/
P. CALL
TUN IN G/ M ULTI CON TROL
DOW N UP
The figure show s an example for the KTF-3010
AM -FM STEREO SYNTHESIZER TUNER KTF-3 0 1 0 HIGHBLEND
W IDE
NARROW
ACTIVE
RECEPTION IF BAND ANT A/ B
RF ATT
RFATT
PTY/
M EM ORY
TA/ NEW S PTY SCARCH DISPLAY
ON/ STANDBY
1 2
: Keys or controls to be used in this operation.
STANDBY
AR
AM
P C L 5
FM
÷ Press P .CALL key once more to cancel the call up mode and return to
the original display.
[ ............................................................................................................................ ]
Blinks for 5 sec.
STANDBY AR
AM 2 6
FM
÷ While the display is blinking, you can select the next station.
÷ If the tuner has stored a preset station name or program service name,
each w ill be displayed.
÷ You cannot enter numbers over 40.
÷ If you make a mistake w hen pressing the 0 key, press the 0
key several times to return to the original display before re-entering.
Last channel memory
When the pow er is turned ON or the BAND key is pressed to
sw itch the band, the last station previously received is auto-
matically tuned in.
KTF-3 0 1 0 / KTF-2 0 1 0 (En)
TUN IN G/ M ULTI CON TROL
BAN D
TUN IN G M ODE +1 0 / CLEAR
P. CALL
DOW N
3 4 5 6 7 8 9 0 / CHARA.
M EM O ANT A B STEREO
TUNED
A L 0
AUTO
kHz
ANT A B STEREO
TUNED
9 ) ) ) .
AUTO
kHz
M Hz
11
UP