Before applying power Caution : Read this page carefully to ensure safe operation. KTF-3010/KTF-2010 (En) Units are designed for operation as follows. Europe , U.K. and Russia ............AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1.The mains plug contains a fuse.
When the program of the desired information ends, the tuner automatically returns to the previous program. If this tuner is connected to a KENWOOD amplifier with the system control cord, the amplifier automatically switches the input source to the tuner input when the program of the reserved information starts, even when you are listening to the input source other than the tuner.
KTF-3010 only The system control connection Connecting system control cords after connecting a Kenwood audio component system lets you take advantage of convenient system control operations. There are two Kenwood system control modes. Make connections according to the groups of terminal symbols shown below.
KTF-3010/KTF-2010 (En) The system control operations Remote Control Lets you operate this unit with the system remote supplied with the amp or receiver. Automatic Operation (except [XR] equipment) Automatically switches the input selector on the amp when you operate one of the tuning keys on this unit. Automatic EON reception Even if the input selector on the amp is set to a source other than tuner, the amp will automatically switch to tuner when an EON broadcast you are waiting for is received.
Useful functions for broadcast reception KTF-3010/KTF-2010 (En) Each time the key is pressed, the operation mode changes. ACTIVE RECEPTION (A.R) key (KTF-3010 only/ When you press the ACTIVE RECEPTION key, the AR indicator flashes, and the tuner will automatically switch the IF BAND, RF available for the FM band only) ATT and ANT A/B functions to select the best conditions for recep- Flashes, then lights...
Broadcast reception KTF-3010/KTF-2010 (En) This section shows you how to receive radio broadcasts. You can store up to 40 stations in the memory and recall them The figure shows an example for the KTF-3010 with a single touch of the key. AM-FM STEREO SYNTHESIZER TUNER KTF-3010 HIGHBLEND TUNING/MULTI CONTROL...
RDS (Radio Data System) KTF-3010/KTF-2010 (En) RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name.
Storing broadcast stations in memory KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 AM-FM STEREO SYNTHESIZER TUNER KTF-3010 HIGHBLEND The automatic memory function allows you to store up to TUNING/MULTI CONTROL WIDE NARROW ACTIVE RECEPTION IF BAND RF ATT ANT A/B 40 stations using only one button.
Receiving a preset station KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 AM-FM STEREO SYNTHESIZER TUNER KTF-3010 HIGHBLEND TUNING/MULTI CONTROL WIDE NARROW ACTIVE RECEPTION IF BAND RF ATT ANT A/B RFATT BAND PTY/ MEMORY TA/NEWS PTY SCARCH DISPLAY TUNING MODE +10/CLEAR P.
Displaying broadcast station names KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 Preparation AM-FM STEREO SYNTHESIZER TUNER KTF-3010 HIGHBLEND TUNING/MULTI CONTROL Switch the ON/STANDBY key to ON. WIDE NARROW ACTIVE RECEPTION IF BAND RF ATT ANT A/B RFATT BAND PTY/ MEMORY...
PTY search KTF-3010/KTF-2010 (En) By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which is currently broad- The figure shows an example for the KTF-3010 casting a program of the specified type. With certain receiving conditions, if may take more than 1 min- AM-FM STEREO SYNTHESIZER TUNER KTF-3010 HIGHBLEND...
KTF-3010/KTF-2010 (En) Start the search. When searching for a Rock Music broadcast. Display with the tuner is Blinks searching PTY/ R C K M PTY SEARCH Program type name display. When a station is received. R C K M To change to a different program type: Repeat steps 1, 2, 3.
EON reservation KTF-3010/KTF-2010 (En) By using the EON function which administers the information of other stations, you can reserve the desired information such as traffic an- The figure shows an example for the KTF-3010 nouncement, news and so on, even though these types of programs are not currently broadcast.
KTF-3010/KTF-2010 (En) When the amplifier and the tuner are connected with the system control cord Even if the input selector of the amplifier is connected to the source other than the tuner, the input selector of the amplifier switches to the tuner when the desired program starts in the EON reservation mode.
Dimensions ......... W : 440 mm (17-5/16") 94 mm (3-11/16") D : 384 mm (15-1/8") Weight (net) ............3.3 kg (7.26 lb) 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed with- out notice. Note Note...
Fixed ..............0.6 V/600 94 mm (3-11/16") D : 384 mm (15-1/8") Weight (net) ............3.3 kg (7.26 lb) 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed with- out notice. Note Note...
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.