Kenwood KTF-2010 Instruction Manual page 10

Storing broadcast stations in memory
10
The automatic memory function allow s you to store up to
40 stations using only one button.
The manual preset function allow s you to store stations
one at a time.
Use the automatic memory function first.
AUTO M EM ORY (Storing stations automatically in memory )
The AUTO M EM ORY function automatically calls up only those stations w hich have RDS broadcasts for storing
(up to 40 stations can be stored).
1 Sw itch to FM band.
2 Press and hold the M EM ORY key (for more than 2 seconds).
M ANUAL PRESET(Storing stations one at a time)
1
Tune in the station to be preset
2
Press the M EM ORY key
If you press the M EM ORY key w hen the preset number dis-
- -
played is " ", the smallest unstored number appears.
3
Select one of the preset numbers from 1 to 40.
1 Turn the TUNING/ M ULTI CONTROL knob.
2 Select the desired station.
Instead of steps 1 and 2, you can use the numeric keys
(0~9,+10), to store the broadcast stations.
Press the numeric keys (0 to 9, +10) in the
follow ing order.
To select " 15" ... 0 , 5
To select " 20" ... 0 , 0 , )
Downloaded from: http://www.usersmanualguide.com/
M EM ORY
M EM ORY
TUN IN G/ M ULTI CON TROL
DOW N UP
M EM ORY
The figure show s an example for the KTF-3010
AM -FM STEREO SYNTHESIZER TUNER KTF-3 0 1 0 HIGHBLEND
W IDE
NARROW
ACTIVE
RECEPTION IF BAND ANT A/ B
RF ATT
RFATT
PTY/
M EM ORY
TA/ NEW S PTY SCARCH DISPLAY
ON/ STANDBY
1 2 3 4
: Keys or controls to be used in this operation.
The tuner completes the scanning of frequencies in 5 minutes.
While scanning, "AUTO" and "M EM ORY" are displayed in turn.
÷ Unless stations are stored w ith the automatic memory function, EON
reservation and PTY search w ill not w ork.
÷ AR w ill not w ork w hen the automatic memory function is on.
÷ Broadcast stations stored manually may be overw ritten.
÷ Stations already stored in the preset memory may be replaced by RDS
stations. (i.e., If the RDS AUTO M EM ORY function finds 15 RDS sta-
tions, the stations currently preset at numbers 01- 15 are replaced by
the RDS stations.)
÷ If the antenna is replaced, you w ill have to reset the automatic memory
function.
÷ Stored stations may be erased from the memory.
Perform the operations in the five seconds that the display is blinking.
STANDBY
AR
AM
0 1
FM
(If more than 5 sec. have elapsed, press the M EM ORY key again.)
Blinks Lights (for 5 sec.)
AR
1 5
FM
The numbers 1 to 40 appear, in turn, as you turn the knob.
, ,
01 02 03
÷ Repeat steps 1 to 3 for each of the stations to be stored in memory.
÷ If a station is stored in a preset number w hich already stores a station
memory under it, the previous memory is replaced by the new memory
content.
÷ Once the memory content has been preset, it is held for about 3 days
even after the pow er cord is unplugged from the mains outlet.
÷ You cannot enter numbers over 40.
÷ If you make a mistake w hen pressing the 0 key, press the 0
key several times to return to the original display before re-entering.
÷ The stored station w ill be erased from the memory.
KTF-3 0 1 0 / KTF-2 0 1 0 (En)
TUN IN G/ M ULTI CON TROL
BAN D
TUN IN G M ODE +1 0 / CLEAR
P. CALL
DOW N UP
5 6 7 8 9 0 / CHARA.
Lights (for 5 sec.)
M EM O ANT A B STEREO
TUNED
8 9 ) )
AUTO
kHz
M Hz
M EM O ANT A STEREO
TUNED
9 ) ) ) .
AUTO
M Hz
, ,
38 39 40