Step 6: Connecting Power; Supplies; Installing Cable Restraints On A Three-Input 240-A Dc Power Supply; (Optional) - Juniper T1600 Quick Start Manual

Core router

Hide thumbs Also See for T1600:

Table of Contents

Step 6: Connecting Power

Connecting Power to a T1600 Router with Three-Input 240-A DC Power Supplies

CAUTION:

See the

T1600 Core Router Hardware Guide

connection procedure for the following power configuration for the six-input

power supply:

Five 60-A input feeds connecting to five inputs

For all other power supplies and connecting six 60-A input feeds to six inputs, see the

following topics for connection procedures.

Connecting Power to a T1600 Router with Three-Input 240-A DC Power

Supplies on page 25

Connecting Power to a T1600 Router with Four-Input 240-A DC Power

Supplies on page 30

Connecting Power to a T1600 Router with Six-Input DC Power Supplies on page 32

Connecting Power to a T1600 Router with Three-Phase Delta AC Power

Supplies on page 36

Connecting Power to a T1600 Router with Three-Phase Wye AC Power

Supplies on page 38

(Optional) on page 25

Setting the Input Mode Switch on a Three-Input 240-A DC Power Supply on page 27

Connecting DC Power Cables on page 28

Installing Cable Restraints on a Three-Input 240-A DC Power Supply (Optional)

Each three-input 240-A DC power supply is shipped with the standard cable restraint

shown in

Figure 14 on page

box for the T1600 router. If your DC power cables are too large or inflexible to fit into the

standard cable restraint, we recommend that you install the optional cable restraint (see

Figure 15 on page

26) on each three-input 240-A DC power supply.

26. Two optional cable restraints are shipped in the accessory

Step 6: Connecting Power

for special considerations and

Table of Contents