Safety Instructions; General Safety Instructions; Intended Use; Scope Of Delivery - HMS Networks Ixxat SG-gateway User Manual

Safety Instructions

2 Safety Instructions
2.1

General Safety Instructions

► Protect product from moisture and humidity.
► Protect product from too high or too low temperature (see
► Protect product from fire.
Do not paint the product.
►
Do not modify or disassemble the product. Service must be carried out by HMS Industrial
►
Networks.
Store products in dry and dust-free place.
►
2.2

Intended Use

The components are used to connect MODBUS devices, energy communication systems and
industrial equipment with each other and to SCADA or cloud systems. They are intended for
installation on standard DIN rail.
3

Scope of Delivery

Included in scope of delivery:
• SG-gateway
• Installation Guide SG-gateway
• Micro SD card
• 1 x power connector 3-pin
• 1 x CAN connector (CAN not supported by SG-gateway software)
• 1 x COM connector
• I/O and M-Bus variant: 1 x I/O connector
• variants with modem: antenna
Dependent on variant and protocol further connectors may be included.
SG-gateway User Manual
Caution
The device may only be put into service and operated by qualified personnel.
Risk of interference if used with antenna (wireless)!
In case of interference install device or antenna in other location.
If device is connected directly to the internet (without router), the firewall must be
enabled.
HMS recommends to use encoding via openVPN, if supported by all participants, to
increase the internet safety.
Technical Data, p. 28).
4.01.0402.20000 1.6 en-US
5 (34)