Inspect Before You Connect - JDS Uniphase FBP Series User Manual

INspEct BEFORE YOU cONNEct

THE SOLUTION
INSPECT Before
By implementing a simple yet important process of
proactively inspecting and cleaning before mating,
you can prevent poor signal performance and
equipment damage.
PROACTIVE INSPECTION
Loose debris and dirt are much easier to clean prior to mating the 2 connector sides. By visually inspecting fiber
connectors at every stage of handling before mating them, you are proactive in preventing signal loss and
equipment damage. Connectors are much easier to clean prior to mating, before embedding debris into the fiber.
DIRTY FIBER – Prior to Mating
REACTIVE INSPECTION
If dirty connectors are not inspected and cleaned prior to mating, dirt and debris can embed into the fiber surface
causing permanent damage. By visually inspecting after a problem is discovered, you are taking a reactive
By this time, connectors and other equipment may have suffered permanent damage.
approach.
DIRTY FIBER – Prior to Mating
8
YoU CoNNECT
CLEANED FIBER – Before Embedding Debris
CLEANED FIBER wITh EMBEDDED DEBRIS
After Mating and Multiple Cleanings
Embedded debris cannot be removed or cleaned!
UsEr MaNUal