Inspect - JDS Uniphase FBP Series User Manual

INspEct: BulkHeaD (Single Fiber Connectors)
INSTALL TIP AND BARREL ASSEMBLY
1.
Install the appropriate inspection tip and
barrel assembly (FBPP-BAP1)
to the probe microscope.
Note: Standard tips require barrel assembly.
INSPECT BULKHEAD
2.
Insert the probe into the bulkhead to

inspect.

3.
Turn the focus control on the probe to focus
the fiber image on the display.
4.
Determine whether clean or dirty.
 If clean, do not touch it and CONNECT.
 If dirty, and if cleaning is required,
CLEAN.
10
Inspection Tip Barrel Assembly
2
Focus Control
4
UsEr MaNUal
INSPECT
1
3