Table of Contents
Advertisement
3.7 "Manual" Irrigation System Operation via the Irrigation
Controller
Note: Manual irrigation will execute without
fertigation.
This function operates the selected valve for
the irrigation duration defined in the program.
The valve will close automatically at the end of
the irrigation duration.
Note that the originally programmed irrigation
schedule continues to operate at the set times.
1. Press
until
more
valves as described in Section 2.3:
"Valve Selection".
2. Press
until
3. Press
to open the valve. The word "On"
is displayed. After an interval of 5 seconds,
a count down of the remaining irrigation
duration appears on the display. To close
the valve manually, press
on the display.
4. To close the valve manually before the end
of the irrigation duration, press
appears again on the display.
Press
to close the valve.
Up to two valves can be operated
simultaneously in this manner. Simply
repeat the above steps for the second valve.
3.8 Sequential "Manual" Operation
of all the Valves
Note: Manual irrigation will execute without fertigation.
The valves can be operated sequentially, one
after the other.
1. Press
until the
2. When nothing is blinking on the display,
press and hold down
Valve 1 will open and operate for the
programmed irrigation duration. When valve
1 closes, valve opens, and so forth until the
last valve has opened. All the valves
designated to open blink.
3. You can influence the process. Pressing
closes the current valve and opens the next one.
4. Important: You can only exit this screen after
all the valves have opened.
appears. Select one or
appears.
.
appears
appears.
for 5 seconds.
until ON
14
Advertisement
Table of Contents
