Table of Contents
Advertisement
3.Additional Functions
3.1 One-Time Irrigation
This function is used to program the irrigation
controller to operate the irrigation system
once only, for the set irrigation duration, at the
set time.
(Duration set as described in Section 2.4).
1. Press
until
2. Press
several times (for all the days
of the week) until
blinks on the display.
3. Go to Section 3.3 to set the start day and
time.
3.2 Cyclical Irrigation
This option is used to program the irrigation
controller to operate the irrigation system in a
cyclical manner, once every
x days, for the irrigation duration.
(Note: Duration for which valve stays open set
as described in Section 2.4).
1. Press
until
2.
several times (for all the days
of the week) until
blinks on the display.
3. With the display blinking, press
The interval between irrigation
sessions (irrigation cycle) in days, hours or
minutes is displayed. For example, if you set 2 days, the irrigation will be
performed every two days for the defined duration.
4. The irrigation cycle can be programmed from one minute up. The settings
are performed in the same manner.
appears.
appears, and
appears.
appears, and
or
.
10
Advertisement
Table of Contents
